Payment Type:T/T,Paypal,Western Union
Incoterm:FOB,CFR,CIF,EXW,FCA,CPT,CIP
Min. Order:10 Piece/Pieces
Transportation:Ocean,Land,Air
Port:Shenzhen,HongKong
$9010-99Piece/Pieces
$70≥100Piece/Pieces
Model No.: Customized
Brand: Jinghui ceramics
Place Of Origin: China
Types Of: Electrothermal Ceramics, High Frequency Ceramics, Dielectric Ceramics, Insulating Ceramics
Material: Zirconia, Zirconium Oxide, Alumina-Zirconia, Yttria Stabilized Zirconia
Color: White
Product Name: Zirconia Thermocouple Protection Ceramic Tube
Design: One End Closed
Type: Advanced Ceramic Tube
Shaping Method: Iso Pressed, Ceramic Injection Molding
Features: High Temperature Resistance, High Mechanical Strength
Usage: For High-Temperature Electrical Devices
Packaging: Export carton
Productivity: 100,000 sets/month
Transportation: Ocean,Land,Air
Place of Origin: China
Supply Ability: 500,000 sets/month
Certificate: RoHS
HS Code: 8547100000
Port: Shenzhen,HongKong
Payment Type: T/T,Paypal,Western Union
Incoterm: FOB,CFR,CIF,EXW,FCA,CPT,CIP
Raw material zirconia, alumina, silicon nitride, silicon carbide
Forming methods
Dry pressing, ISO pressing, ceramic injection molding, extrusion,hot pressing
Typical designs
closed round end tube, closed flat end tube
Dimensional capability
OD is range from 1 mm to 300 mm, length from 0.5mm to 800 mm
Secondary processing
Fine grinding, Drilling, Laser cutting, CNC machining, lapping
Accuracy capability
The tolerance of OD can be ± 0.001 mm, ID ± 0.005 mm, length ± 0.10 mm
Surface treatment
polishing with diamond - like surface, glazing, metallzing for ceramic to metal jointing
Surface quality
Free of cracks, foreign contamination, mirror surface better than Ra 0.1
1. Much higher density than most of technical and advanced ceramics, over than 6 g/cm3
2. Excellent wear and abrasive resistance, much higher 276 times than stainless steel
3. Various complicated design production capability with tighten tolerance, precise dimensions
4. Low thermal conductivity, less than 3 W/m.k at room temperature, so it can couple with metal well
5. Exceptional high hardness, over than 1300 MPa for Vicker hardness, it leads to high wear resistance
6. Can withstand higher temperatures up to 2400° under vacuum or reduced atmospheres
7. Exceptional fracture toughness than almost advance ceramics, reaches up to 8 Mpa m1/2
8. Chemical inertness which can withstand most of acids and alkali, aging resistance and not rust forever
9. Resistance to molten metals and avoid any metal residual on surface due to an extraordinary melting point
Most of the stabilized zirconia used in industrial refractories are prepared by electrofusion. In the zircon fusion process, carbon and stabilizer calcium oxide are added. While silicon is removed, the zirconia and calcium oxide react to form a solid solution, which is then crushed and sized to obtain stable zirconia. The stable and partially stabilized zirconia used in fine ceramics is generally prepared by wet methods. The neutralization precipitation method is currently mature and commonly used. Dissolve the purified zirconium oxychloride in pure water, filter to remove insolubles, adjust the zirconium concentration in the solution, and add the required amount of yttrium chloride solution (or chloride solution of other rare earth metals or alkaline earth metals), then add ammonia Neutralize precipitation. After washing the precipitate with hot water, it is filtered, dried and calcined. The calcined product can be crushed to obtain ultra-fine stable zirconia powder.
Partially stabilized zirconia is prepared by controlling the amount of stabilizer added to make it insufficient to achieve complete stability. Partially stabilized zirconia has high strength and thermal shock resistance, and has a wide range of uses in Structural Ceramics.
Remark: we have been supplying variety of customized Zirconia Ceramic Tube per customers' specification,
real samples with low MOQ requirement.
Gerneral
Property
Units
ZrO2
(3Y-TZP)
Mechanical
Density
g/cm3
≥6.0
Water absorption
%
0 Hardness
HV 1300
Flexural strength
MPa ≥1200
Compressive strength
MPa ≥1990
Fracture toughness
Mpam 1/2
6.5-8
Thermal
Max. service temperature
(Non-loading)
℃
1000
CTE
1×10 -6 /℃
8.0~9.5
Thermal shock
T(℃)
≥300
Thermal conductivity at RT
W/m.k
3 Specific heat
1 x 10 3 J/(kg·K)
0.46
Electrical
Volume resistivity at RT
ohm.cm
>1 x 10 11
Dielectric strength
KV/mm
17 Dielectric constant (1MHz)
(E)
29
We have in-housing comprehensive manufacturing types of equipment, including forming, sintering, CNC machining,
precision grinding, laser cutting and so on, it helps us to control the quality very well, also it greatly benefits cost control.
Q 1: Is it available to provide customized products?
A: We offer custom-made demand service as per different grade materials, dimensions, and designs.
Q 2. Are you a factory or trading company?
A: We are a direct manufacturer with own complete manufacturing machines from forming to sintering.
Q 3: Do you send a sample to check?
A: Sure, the standard design sample in stock will be free and freight collect.
We also support trail/sample order with very low-level quality for R&D or prototyping needs
Q 4: When can I get the price?
A: We regularly quote within 24 hours after we get your inquiry. If you are in urgent need of getting the price.
Please call us or tell us in your email so that we will proceed with your inquiry as a priority.
Q 5: How to ensure quality?
A: IQC, IPQC, QA, OQC are strictly performed from incoming material to inspection of finished products.
CKP and AQL value are introduced in the processing line, Fully cosmetic inspection will be carried out.
Q 6: What other products are you dealing with?
A: We focus on a variety of Ceramic Substrate, Metallized ceramics, ceramic seal and Textile Ceramics besides zirconia ceramic tube.